If you’ve noticed a musty smell coming from your front load washing machine, it could be due to mold and mildew buildup in the gasket. Don’t worry—mold removal is easy with the right tools and techniques! In this blog post, we’ll show you step-by-step how to remove mold from your front load washer gasket.
Clean the Washer Gasket
Cleaning the washer gasket is the first step in removing mold from a front-load washer. To do so, carefully peel back the rubber gasket that seals the washer door and use a rag or towel to clean it. Be sure to get into all of the crevices and corners. Once the gasket is clean, spray it with white distilled vinegar and let sit for 2-4 hours. After the time has elapsed, rinse the gasket with hot water and leave the washer door open so the gasket can air dry completely. This will ensure that any remaining mold spores are eliminated.
Run a Cleaning Cycle
Once you have finished cleaning the gasket, you can run a cleaning cycle to remove any remaining mold. This can help to prevent further growth and make sure that your washer is in tip-top shape. To do this, fill your washer with hot water and add a cup of white distilled vinegar. Allow the machine to run through its normal cycle. After the cycle is complete, you can then rinse out the vinegar with hot water. This will help to kill any remaining mold and leave your washer smelling fresh.
Use White Distilled Vinegar
Once you are done cleaning the gasket of the washer, it’s time to focus on removing any mold or mildew that may have built up. One of the best ways to do this is by using white distilled vinegar. Pour a cup of white distilled vinegar into a spray bottle and spray the gasket liberally. Let the vinegar sit for two to four hours before continuing with your cleaning routine. After this time has elapsed, rinse the gasket with water to remove any remaining vinegar residue.
Use Hot Water
In addition to using hot water to clean your washer gasket, you can also use it to rinse the gasket after you have cleaned it with vinegar or other solutions. To do this, turn the washer off and fill the drum with hot water. Next, open the washer door and allow the water to fill up the rubber gasket. Leave it for a few minutes and then rinse out the water. Make sure to dry the rubber gasket completely after rinsing.
Add Baking Soda to the Detergent
After wiping the gasket clean and removing any mold or mildew, it’s important to run a cleaning cycle to remove any residue or odor left behind. To do this, add a cup of baking soda to your detergent and run a hot water cycle. This will help to remove any lingering odors and residue from the washer gasket.
Clean the Drum with a Soft Cloth
After you have cleaned the washer gasket, the next step is to clean the drum with a soft cloth. To clean the drum, use a soft cloth dampened with mild detergent and warm water. Make sure to wipe any visible mold or mildew off of the inside of the washer drum. Make sure that you are working carefully and that you are not pressing too hard with the cloth. Once you have finished cleaning the drum, rinse it with hot water. This will help to remove any residue from the detergent and the cleaning cloth.
Use Hydrogen Peroxide
In addition to using bleach to sanitize the washer gasket, you can also use hydrogen peroxide. Hydrogen peroxide is a natural disinfectant that is effective in killing mold, mildew and other contaminants. To use hydrogen peroxide, mix one cup of hydrogen peroxide with one cup of water and apply the solution to the gasket using a clean cloth. Allow the solution to sit on the gasket for 10 minutes before rinsing with hot water. After rinsing, allow the gasket to air dry before using your front-load washer again.
Use Bleach to Sanitize the Washer Gasket
Once the gasket has been thoroughly cleaned, it is important to sanitize the gasket in order to remove any remaining mold and bacteria. To do this, use a diluted bleach solution and a soft cloth. Make sure to wear gloves and protective eyewear when handling the bleach solution. Dip the cloth into the solution and wipe the inside of the gasket to ensure that no mold or bacteria remain. Let the bleach solution sit on the gasket for a few minutes before rinsing it off with hot water.
Remove Odor and Residue with Vinegar and Baking Soda Mixture
Once you have completed the necessary steps to remove the mold and sanitize the washer gasket, it is important to remove any odors or residues that may remain. An effective way to do this is to create a mixture of white distilled vinegar and baking soda. This combination can be sprayed onto the washer gasket and left to sit for 15-20 minutes. After this time, the mixture should be wiped away with a soft cloth, leaving behind a fresh and clean washer gasket.
Rinse the Washer Gasket with Hot Water
After using hydrogen peroxide and bleach to sanitize the washer gasket, it is important to rinse the gasket with hot water. Hot water helps remove any remaining residue and odors. To do this, fill the washer with hot water and let it sit for a few minutes. Once the water has had time to heat up, use a cloth to wipe down the gasket and clean away any remaining residue. Once everything has been wiped down, empty the washer and leave the door open to air dry. This will help prevent any mold from forming in the future.